review

Electric hydraulic thruster is a compact drive control device that integrates an electric motor, centrifugal pump, and oil cylinder. It is widely used as a drive device for various drum brakes and disc brakes, and can also be used for various industrial valves, gates, directional swinging, and rotation

Main Features

• The motor is a non oil immersed structure with B-level or F-level insulation (according to user requirements), good heat resistance, and long service life.
• The motor junction box cover is sealed and uses cable stuffing boxes for incoming wires, which are firm and reliable. The electrical enclosure protection level reaches IP65.
• The oil cylinder housing is equipped with a balance chamber on one side, which allows the thruster to be installed in any direction from 0 to 180 degrees, thereby expanding its range of use.
• The shell is made of cast aluminum alloy, which is lightweight and has a beautiful appearance.
• The motor shaft and push rod have undergone special surface treatment, greatly extending the lifespan of the seals.
• All seals and bearings are made of world-renowned products, with reliable sealing and long service life.
• The fasteners are made of stainless steel material, which is beautiful and durable.

accessory

• Upper limit switch: It can indicate whether the pusher is turned on, whether the push rod is pushed to the specified position, and other information.
• Lower limit switch: It can indicate whether the pusher is closed correctly, whether the push rod has returned to the specified position, and other information. The upper and lower limit switches can be set simultaneously.
• Add a built-in spring (only for short stroke thrusters), and the spring force can be determined by the user, but it must not exceed the built-in spring force.
• Add a heater: When the ambient temperature at the usage location is below -25 ℃, a heater can be added if needed by the user.
• The rising and falling delay valves or rising and falling delay valves can infinitely extend the rising or falling time, with a delay range of 5 seconds to 30 seconds. The specific delay value can be adjusted according to user requirements.

Terms of Use

• Environmental temperature: -20 ℃~+50 ℃
• Relative humidity:≤ 90%, when used in humid and hot areas or corrosive atmospheresWhen in a gas environment, anti-corrosion products should be selected
• Adaptive work schedule: intermittent (S3-60%) and continuous (S1) work schedule
• When there are special requirements, please negotiate and confirm when placing an order.

Basic Parameters

Ed series electric hydraulic thruster:

• Product Model: Ed220-50、Ed300-50、Ed500-60（120）、Ed800-60（120）、Ed1250-60（80、120）、Ed2000-60（80、120）、

  Ed3000-60（80、120）、Ed4500-80（120）

• Rated stroke (mm): 50, 60, 80, 120
• Rated thrust (N): 220, 300, 500, 800, 1250, 2000, 3000, 4500

YTD series electric hydraulic thruster:

• Product Model: YTD220-50、YTD300-50、YTD500-60（120）、YTD800-60（120）、YTD1250-60（80、120）、YTD2000-60（80、120）、

  YTD3000-60（80、120）、YTD4500-80（120）

• Rated stroke (mm): 50, 60, 80, 120
• Rated thrust (N): 220, 300, 500, 800, 1250, 2000, 3000, 4500

MYT2 series electric hydraulic thruster:

• Product Model: MYT2-10/25、MYT2-25/4、MYT2-25/5、MYT2-50/6、MYT2-100/6、MYT2-125/6、MYT2-125/10、MYT2-200/6、

  MYT2-200/12、MYT2-300/6、MYT2-300/12

• Rated stroke (mm): 25, 40, 50, 60, 100, 120
• Rated thrust (N): 100, 250, 500, 1000, 1250, 2000, 3000