Zusammenfassung

The drum brake series is a brake developed through long-term production experience and new design ideas.

And this is a long-life brake series that enables simple maintenance and impact-free and low noise through air dampers.

Hauptmerkmale

• Use brake lining with contact angle of 60° (non-asbestos)
• Excellent braking torque characteristics with the initial stage, easy to exchange
• The upper and lower clearance of the brake lining is adjusted, and it adopts automatic adjustable
• The usual predicate of the brake lining is not necessary.
• Can be opened manually.
• It is a voltage-free brake, but it is possible to manually open according to the attached special nuts (bolts).
• Large-size electromagnetic brakes come with air vibration absorber
• No impact by installing air damper
• Low noise is possible.
• Other electromagnetic brakes are also optionally equipped.
• The standard range is shown in the note column of each specification and dimension table.

auswählen

• Manuelle Auslösevorrichtung
• Release (open gate) or close (closed gate) limit switch to realize the signal display of whether the brake is released or closed normally.
• Die automatische Ausgleichsvorrichtung für den Bremsbelagverschleiß ermöglicht einen stufenlosen automatischen Ausgleich des Bremswegs und des Bremsmoments bei abgenutzten Bremsbelägen.
• The pad wear limit limit switch can realize the signal display when the brake pad wears to the limit (note: automatic compensation device must be provided during application).
• The pusher drive with a downward delay valve can achieve delayed closure of the brake.