revise

The SBHA series hydraulic station is mainly used as a matching drive for SB and SBD series safety brakes, and can also be used as a matching drive for other single acting oil cylinders.

When adding the suffix/1 to the compression station model, it is used to match the single mechanism safety brake, controlling the brake to open and close simultaneously;

When adding the suffix/2 to the hydraulic station model, it is used to match the dual mechanism safety brake. The brake that controls each oil circuit can be opened and closed simultaneously, or operated separately.

If used for separate actions of other multiple mechanisms, special instructions should be provided when ordering.

The YZB series hydraulic station is mainly used for the matching drive of YLZ series wheel side brakes and YGZ series top rail actuators, and can also be used as a matching drive for other single acting oil cylinders.

The YZBA series hydraulic station is mainly used for the matching drive of YJA, YJD, YJE, YJJ series rail clamps, and can also be used as a matching drive for other single acting oil cylinders.

The YZBS series hydraulic station is mainly used as a matching drive for SBD series safety brakes, and can also be used as a matching drive for other single acting oil cylinders.

Características principales

  • The main hydraulic components are from well-known domestic and foreign brands, with stable and reliable performance. According to customer requirements, hydraulic components from brands such as Rexroth, Parker, Vickers, etc. can also be selected.
  • The main valve component is the seat valve, which has low leakage and good system pressure holding performance. The motor does not need to run for a long time.
  • Equipped with a manual pump, it can serve as an emergency power source during power outages and maintenance.

accesorio

  • When the limit device is manually released and the brake is manually released, the signal is fed back to the main control for interlocking protection.
  • Release (open) limit switch, which can display the signal of whether the brake is released normally or provide interlocking protection
  • The closing limit switch can display the signal of whether the brake is closed normally or provide interlocking protection.
  • Pad wear limit switch, when the pad wear reaches its limit, sends a signal for the host to interlock protection.

Condiciones de uso

  • Temperatura ambiente: -20 ℃~+50 ℃
  • Humedad relativa: ≤ 90%
  • Adaptive working system: S3,40%
  • Si hay requisitos especiales, negocie y confirme al hacer el pedido.

Parámetros básicos

SBHA series hydraulic station:

  • Product Model: SBHA10-12/1、SBHA10-20/1、SBHA14-09/1、SBHA14-16/1、SBHA10-12/2、SBHA10-20/2、

    SBHA14-09/2、SBHA14-16/2

  • Applicable products: SBHA10-12/1, SBHA10-20/1, SBHA14-09/1, SBHA14-16/1 series are suitable for single mechanism and single hydraulic station with 1-2 sets of safety brakes;

    The SBHA10-12/2, SBHA10-20/2, SBHA14-09/2, and SBHA14-16/2 series are suitable for dual mechanism single oil circuit matching with 1-2 sets of safety brakes.

  • Rated working pressure (Mpa): 8, 10, 14, 16

YZB series disc hydraulic station:

  • Product models: YZB08-20 (27), YZB12-15 (23), YZB14-27, YZB16-23
  • Applicable products: Suitable for windproof brakes
  • Rated working pressure (Mpa): 8, 12, 14, 16

YZBS series hydraulic station:

  • Product models: YZBS10-12, YZBS10-20, YZBS14-09, YZBS14-16
  • Applicable products: Suitable for single mechanism safety brakes
  • Rated working pressure (MP): 10, 14

YZBA series hydraulic station:

  • Product models: YZBA10-12 (20), YZBA12-12, YZBA14-09 (20), YZBA16-12 (16)
  • Applicable products: Suitable for windproof brakes
  • Rated working pressure (MPa): 10, 12, 14, 16

Estaciones hidráulicas de las series SBHA, YZB, YZBA (S)

The SBHA series hydraulic station is mainly used as a matching drive for SB and SBD series safety brakes, and can also be used as a matching drive for other single acting oil cylinders.

When adding the suffix/1 to the compression station model, it is used to match the single mechanism safety brake, controlling the brake to open and close simultaneously;

When adding the suffix/2 to the hydraulic station model, it is used to match the dual mechanism safety brake. The brake that controls each oil circuit can be opened and closed simultaneously, or operated separately.

If used for separate actions of other multiple mechanisms, special instructions should be provided when ordering.

The YZB series hydraulic station is mainly used for the matching drive of YLZ series wheel side brakes and YGZ series top rail actuators, and can also be used as a matching drive for other single acting oil cylinders.

The YZBA series hydraulic station is mainly used for the matching drive of YJA, YJD, YJE, YJJ series rail clamps, and can also be used as a matching drive for other single acting oil cylinders.

The YZBS series hydraulic station is mainly used as a matching drive for SBD series safety brakes, and can also be used as a matching drive for other single acting oil cylinders.

CONSULTAR AHORA

Solicitar presupuesto

Nos pondremos en contacto con usted en el plazo de un día laborable. Por favor, preste atención a su correo electrónico.

    Productos relacionados

    Nos pondremos en contacto con usted en el plazo de un día laborable. Por favor, preste atención a su correo electrónico.