Resumen

The BRP2 AC-operated DC electromagnetic brake is a compact disc electromagnetic brake used to stop the motor and be equipped with various regenerative braking control systems, such as inverters.

Características principales

• Air dampers equipped as standard equipment minimize shock and noise.
• An automatic adjustment system is used to adjust the vertical clearance of the brake lining.
• Since the master pin unit adopts a non-lubricated bushing, non-lubricated operations are allowed in a general indoor environment.
• Since the brake lining is made of sintered metal, there will be no fading, which will stabilize the performance of the brake, even in high temperature environments.
• Since the brake (liner) is symmetrical on both sides, it can be mounted on either side of the disk rotor. (Please note that the junction box must be installed on the back).

elija

• Manual release device
• Release (open gate) or close (closed gate) limit switch to realize the signal display of whether the brake is released or closed normally.
• The automatic compensation device for braking pad wear can realize stepless automatic compensation of the tile retardation distance and braking torque when the pad wear is worn.
• The pad wear limit limit switch can realize the signal display when the brake pad wears to the limit (note: automatic compensation device must be provided during application).
• The pusher drive with a downward delay valve can achieve delayed closure of the brake.